BMR Lowering Springs SP079R
BMR Lowering Springs SP079R
Tags
Product Description
There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your 2010 and newer Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.
BMR lowering springs are designed to improve handling performance by lowering your ride's center of gravity for tighter suspension and reduced body roll and wheel well gap. Cold-wound from high-tensile strength chrome silicon for a long-lasting, consistent rate without long-term "memory" loss, these suspension components are designed for additional spring rate in the stiffer portion of the coil for perfect handling during aggressive cornering. Dozens of lowering spring models are available with various front and rear drop measurements. Select the springs tailored for fitment on your vehicle.
Extended Description
- These springs will lower the rear of your Camaro, and feature a fine-tuned spring rate to give you great handling and a smooth ride.
Application Summary
Fitment
Fitment
Part Type
Suspension Struts / Shocks / Coil Springs / Camber Plate Kit
Additional Information 2
- Lowers the rear of your V-8-equipped 2010 - 2015 Camaro 1.25-inchs
- Improves handling and ride quality
- 460 lb/in spring rate
- Lower center of gravity
- Increased driver control
- decreases body roll
- Manufactured from chrome silicon high-tensile spring wire
- Cold wound on a CNC Coiling Machine to exact specifications
- Lifetime warranty against spring sag
- Stress-relieved at 750 degrees F
- Shot-peened
- Computer tested for accurate height and spring rate
- Fits V8 Models Only
- Made in the U.S.A.
description
aaia_ |
Suspension Struts / Shocks / Coil Springs / Camber Plate Kit |
---|---|
associated_ |
Lowers the rear of your V-8-equipped 2010 - 2015 Camaro 1.25-inchs;Improves handling and ride quality;460 lb/in spring rate;Lower center of gravity;Increased driver control;decreases body roll;Manufactured from chrome silicon high-tensile spring wire;Cold wound on a CNC Coiling Machine to exact specifications;Lifetime warranty against spring sag;Stress-relieved at 750 degrees F;Shot-peened;Computer tested for accurate height and spring rate;Fits V8 Models Only;Made in the U.S.A. |
market_ |
There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your 2010 and newer Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. |
product_ |
These springs will lower the rear of your Camaro, and feature a fine-tuned spring rate to give you great handling and a smooth ride. |
product_ |
BMR Suspension - SP079R |
product_ |
Lowering Springs, Rear, 1.25" Drop, 460 Spring Rate, V8 |
product_ |
Lowering Springs |
s_item
department | Chassis & Suspension |
---|---|
section | Suspension Components |
name | BMR Lowering Springs SP079R |
brand | BMR Suspension |
price | 149.95 |
blurb | Lowering Springs, 1.25 in. Rear, Red Powdercoated, Chevy, Pair |
title | BMR Lowering Springs |
description | BMR lowering springs are designed to improve handling performance by lowering your ride's center of gravity for tighter suspension and reduced body roll and wheel well gap. Cold-wound from high-tensile strength chrome silicon for a long-lasting, consistent rate without long-term "memory" loss, these suspension components are designed for additional spring rate in the stiffer portion of the coil for perfect handling during aggressive cornering. Dozens of lowering spring models are available with various front and rear drop measurements. Select the springs tailored for fitment on your vehicle. |
item_row
handle | BMR-SP079R |
---|---|
item_ |
201821 |
brand_ |
278 |
brand_ |
BMR Suspension |
item_ |
https://d32vzsop7y1h3k.cloudfront.net/a78754ed56845136fe723df823a6b477.JPG |
item_ |
SP079R |
item_ |
BMR 10-15 5th Gen Camaro V8 Rear Lowering Springs - Red |
item_ |
Springs & Coils |
item_ |
Lowering Springs |
item_ |
887753327536 |
item_ |
149.95 |
item_ |
149.95 |
t14_ |
0 |
mfr_ |
6 |
dim_ |
14.00 |
dim_ |
15.00 |
dim_ |
15.00 |
dim_ |
8.00 |
shipping_ |
14.83 |
item_ |
bmrSP079R |
taxonomy_ |
5383 |
collection_ |
273964728362 |
collection_ |
Springs & Coils |
status | Active |
item_ |
1 |
item_ |
Suspension |
productTaxonomy | 5383 |
Overview
Brand | BMR Suspension |
---|---|
Notes | Not recommended for convertible models. |
Quantity | Sold as a pair. |
Part Type | Coil Springs |
Ride Height | Lowered |
Spring Type | Coil |
Product Line | BMR Lowering Springs |
Spring Finish | Red |
Ride Height Note | Additional ride height information may be available for your vehicle, please refer to the app tab. |
Bushings Included | No |
Spring Positioning | Rear |
Progressive Rate Spring | No |
Manufacturer's Part Number | SP079R |
Rear Spring Lowered Amount Range (in.) | 1.25 in. |